- This topic has 0 replies, 1 voice, and was last updated 3 years, 3 months ago by
.
-
Posts
-
Error we are getting, can only be seen in Wecsplorer. Does not show up on the WOSE screen. It is a shutdown.
<p class=”MsoNormal”><span style=”color: #1f497d;”>TDY201, SHD LOW, LO Temp – HT Temp, engine inlet, (-12) was the exact last code. The number in parenthesis changes each time, which is probably the deviation its off.</span></p>
Has anyone else run into this problem and what was the fix.Some time ago, we had this show up and we replaced both the LO Temp and the HT Temp Sensors and the problem went away until recently.
We are now getting this fault on every 1st attempt startup, until today, and it happened on several attempts to start up.
The Temperatures on the WOSE seem to match the other two engines at startup.
Has anyone else experienced this and what was the remedy?
- You must be logged in to reply to this topic.